PRODUCT OVERVIEW
Good-Bye Stains is a citric acid-based stain remover. The product is applied directly to the water and does not require premixing. Good-Bye Stains is packaged in convenient 1-pound bags and treats 10,000 gallons of water. It is best used on fresh stains and for iron staining including those caused by tannins from leaves and other organic matter being in contact with the pool surface over long periods of time.
PRODUCT HIGHLIGHTS
• 100% Citric Acid stain remover
• Effective on all pool surfaces
• All-natural way to remove stains from surfaces
• Less expensive alternative to ascorbic or oxalic acid
ACTIVE INGREDIENTS
• Citric Acid
APPLICATION & DOSAGE
1. Adjust pH to 7.4.
2. Reduce chlorine to below 1.0ppm.
3. Turn pool filter system off 4 hours before treating, allowing the water to become still.
4. Add 1 bag of Good-Bye Stains per 10,000 gallons of water. Sprinkle over pool surfaces directly above stained areas.
5. Keep the filter system off for one hour and then restart filter system.
6. Add 16 ounces of Elements Good-Bye Metal Heavy Duty (use Good-Bye Metal NO PHOS for pools with saltwater chlorine generators) per 10,000 gallons of water.
7. Let the pool run for 48 hours continuously.
8. Clean or backwash filter.
NOTE: STUBBORN STAINS MAY REQUIRE MULTIPLE APPLICATIONS OR THE USE OF ELEMENTS GOOD-BYE DIFFICULT STAINS (THE PROCESS IS THE SAME AS DETAILED ABOVE).
